BC Racing coilover kit for the 2016-2021 Honda Civic Base (10th Generation). It comes in 4 series (BR Series, DS Series, HM Series, ZR Series), so you can pick the setup that suits how you drive. Every BC kit is a complete, fully rebuildable coilover system with ride height that adjusts independently of spring compression.
Specifications
- Default spring rates: Standard: front 6 kg/mm - rear 4.5 kg/mm
- Custom spring rates available on request
BR Series - from $1,774
The BR Series is BC Racing's most affordable full coilover system, and it doesn't cut corners on ride comfort, handling, build quality or ride height. BC Racing tests every vehicle and keeps refining the setup until it is properly balanced, and the off-the-shelf spring rates are picked to sit between comfort and performance, so the car isn't left oversprung. Damping is adjustable over 30 clicks, with compression and rebound set together, which is one of the widest adjustment ranges on the market.
- Highly customizable
- Mono-tube shock design
- Linear piston and damping curve
- Ride height adjusts independently of spring compression
- 30-click damping adjustment (compression and rebound adjusted together)
- Front camber plates standard on applicable kits
- Rear camber plates available on applicable kits
- Custom spring rates and Swift springs available
- Custom valving, or valving matched to custom spring rates
- Fully rebuildable
DS Series - from $2,066
The DS Series uses BC Racing's proprietary digressive piston. It gives more damping force at low piston speeds while keeping a linear feel at higher speeds. That extra low-speed control is what the driver feels most: less roll, pitch and dive, and quicker weight transfer on a technical road course. BC Racing pitches it as the choice for the best driver feel.
- Highly customizable
- Mono-tube shock design
- Digressive piston and damping curve
- Satin chrome finished shock body
- Ride height adjusts independently of spring compression
- 30-click damping adjustment (compression and rebound adjusted together)
- Front camber plates standard on applicable kits
- Rear camber plates available on applicable kits
- Custom spring rates; Swift spring compatible
- Custom valving, or valving matched to custom spring rates
- Fully rebuildable
HM Series - from $3,745
The HM Series combines the inverted mono-tube damper of the RM Series with the independent compression and rebound adjustment of the ER Series. On McPherson strut cars it runs inverted mono-tube dampers front and rear, with steel braided lines from the top of each damper to external reservoirs. The reservoirs hold the secondary damping piston, add oil capacity and improve heat dissipation. It's built for Subarus and other McPherson strut cars that see heavy track use.
- Highly customizable
- Swift springs standard
- Inverted mono-tube damper
- Linear twin-piston design
- Ride height adjusts independently of spring compression
- 30 clicks of compression adjustment at the external reservoirs
- 30 clicks of rebound adjustment at the bottom of the damper
- Front and rear camber plates standard on all applicable kits
- Front and rear pillowball mounts standard where camber plates don't apply
- Custom valved to suit the spring rates the driver requests
- Fully rebuildable
ZR Series - from $4,183
The ZR Series has the most damping adjustment of any BC Racing coilover. It is track tested and aimed at racers who need more adjustment than the ER or HM Series: 15 clicks of low-speed compression, 12 clicks of high-speed compression and 30 clicks of rebound, with full height adjustment independent of shaft travel and spring compression. On McPherson strut cars it comes with an inverted mono-tube damper, with a steel braided line from the top of the damper to external reservoirs that can be mounted on the chassis for easy access. Double A-arm cars get upright dampers, with braided lines or solid stems leaving the bottom of the damper. Those run to a reservoir mounted under the chassis or on the shock body.
- Inverted mono-tube damper
- Linear twin-piston design
- Swift springs standard
- Ride height adjusts independently of spring compression
- 30 clicks of rebound adjustment
- 15 clicks of low-speed compression adjustment
- 12 clicks of high-speed compression adjustment
- Front and rear camber plates standard on all applicable kits
- Front and rear pillowball mounts standard where camber plates don't apply
- Custom spring rates available
- Custom valving, or valving matched to custom spring rates
- Fully rebuildable
Not every car can take inverted dampers front and rear. Where it can't, an upright mono-tube damper is supplied and the reservoir line or hard stem leaves the base of the damper. Not every car uses camber plates front and/or rear either; on those, the HM and ZR Series come with pillowball top mounts instead.
Top plate types
- RA Type: front pillowball or camber top mount, rear rubber or reuse OEM top mount
- DA Type: front pillowball or camber top mount, rear rubber or reuse OEM top mount
ER, HM, ZR and ZX Series kits come with pillowball or camber upper mounts where the car allows it. Camber plates are only included on kits where they apply. Pillowball mounts are rigid motorsport parts: they sharpen handling but add a lot more noise, vibration and harshness than OEM or rubber mounts.
What's included
- Full BC Racing coilover kit, front and rear
Fitment
- 2016-2021 Honda Civic Base (10th Generation)
- Engineered for OEM suspension components only, including control arms and spindles. BC Racing cannot guarantee compatibility with aftermarket parts.
Installation
- ER, HM, ZR and ZX Series use an external reservoir on a fixed stem mount as standard. Steel braided lines are an option if requested before you order, and the installer has to find a remote mounting spot for the reservoirs.
- Email us for the install guide.
Good to know
- Custom builds are available: extreme low, custom spring rates, Swift spring upgrade, corner replacements and upper mount changes. Custom builds add about 3-4 weeks of build time. Email us to set one up.
- Warranty: BC Racing North America gives full kits a 2-year limited warranty against manufacturing defects, judged case by case. It doesn't cover problems caused by installation or adjustment, or labour costs, and it only applies to the original buyer. Keep your invoice and the kit's serial number.
- Product photos are for reference and may not show the exact kit for your car.
BC Racing part numbers: A-154-BR-RA, A-154-DS-DA, A-154-HM, A-154-ZR. Not sure which kit or top plate type fits your car? Send us your VIN and we will confirm before you order.
Why buy from OSS Motorsport
OSS Motorsport is a Manitoba performance shop, and we can source parts for just about any make. We ship Canada-wide with CAD pricing. BC Racing kits ship from the US and in-stock kits usually arrive in about 2 weeks, with no duties or brokerage fees to pay at the door. If BC has to build your kit, add their 3-5 week manufacturing time. Questions? Email sales@ossmotorsport.com or call 431-831-0100.